A security door — the leaf itself is an armored door in trade terms — is not just a steel panel: it is a system of frame, multi-point mechanism, cylinder and cylinder guards, and each of those parts wears out on its own schedule. This page explains how the door is built, what can be repaired or adjusted on site, and when it makes more sense to replace a part, or the whole door.
When does a security door need attention?
Most security-door problems start as something small — a lock that needs effort, a new noise, a key that turns stiffly. The four situations below cover most call-outs, and in most of them a single component can be treated instead of replacing the door.
Note that a mamad (safe-room) door is a different product with its own mechanism. For a jammed safe-room door or window see safe-room door and window opening.
The multi-point mechanism is jammed
When you have to lift or pull the door for the bolts to engage, the rods are no longer aligned with the frame. Usually that is an adjustment of the door and hinges rather than a new mechanism — an on-site diagnosis shows which. A door that is already stiff today is usually the door that seizes completely next season, when the materials expand in the heat.
The cylinder in a security door is worn
On a security door the cylinder is the part replaced most often, and it is also the favourite target in break-in attempts. It can be swapped for a cylinder with suitable protection without touching the rest of the system — see urgent cylinder replacement.
The door no longer closes, or rubs on the frame
A door that has dropped, a perished seal or a loosened hinge all cause rubbing and stiff locking. This is a mechanical fault handled by adjustment; left alone it usually becomes a door that will not lock at all.
Locked out in front of a security door
An armored door is built to make opening hard, so the work on one is slower and more careful than on a standard door. That is an emergency door opening call; the method is chosen for the lock type, and in some cases the recommendation after opening will be to replace a component.
How a security door is handled
1. Describe the fault by phone
Tell us the manufacturer marked on the door, what exactly is not working, and whether you still have a key. That is usually enough to tell an adjustment apart from a cylinder change or a lockout call.
2. On-site diagnosis
We check the cylinder, the cylinder guards, the bolts and the alignment of the leaf against the frame. The diagnosis separates a mechanical fault from a component that has reached the end of its life.
3. Repair or component replacement
Where possible we adjust and lubricate on site; where the part is worn, we propose replacing that part only. We explain the difference in cost and in security between the options before anything is decided.
4. Test it together
We lock and open with you from both sides, with the door closed and with it open. If anything is left that needs watching, we say so at the time rather than leaving it to be discovered later.
Frequently asked questions
What is the difference between a security door and an ordinary steel door?
A security door combines a reinforced leaf with a multi-point mechanism and a matching frame, while an ordinary steel door may rely on a single point of locking. The practical difference is the number of locking points and the strength of the frame.
Can an existing door be upgraded instead of replaced?
Often yes: a new cylinder, an added cylinder guard and an adjusted mechanism improve the situation without a new door. That suits a door whose leaf and frame are still sound, and usually costs less than a replacement.
Does opening a security door cause damage?
We use non-destructive methods whenever technically possible and work to minimise the risk of damage. If a method could harm a component, we say so before starting.
Do you replace or install a new steel door?
Yes. We supply and install steel doors, including Rav Bariach and Hosem doors: see steel door replacement and steel door installation, with an example from the field in replacing a Rav-Bariach door. When only one component has failed, a repair or a part replacement is usually better value than a new door.
A question about your security door?
Describe what is happening and we will tell you whether it looks like an adjustment, a component change or an urgent call-out. Available 24/6, except Shabbat.