A lost key, a key snapped inside the lock or a cylinder that spins without moving the bolt — replacing the cylinder puts the door back under your control without replacing the door itself. We replace cylinders in wooden, aluminium, glass and steel doors, as well as smart-lock cylinders, and match the model and size to your door.
When does a cylinder need replacing?
The cylinder is the small part that carries the whole lock, and it is the first part to wear out because it does the work on every turn of the key. Below are four situations in which the cylinder is replaced, and usually without taking the door apart.
A key is lost or still held by someone else
A key dropped in the street, left with a previous tenant or never returned at the end of a lease means the lock still works but is no longer yours alone. Replacing the cylinder retires every old key and issues a fresh set, without touching the door leaf or the frame. While the old key exists, the door is open to whoever holds it.
A key broke inside the cylinder
The fragment left inside blocks the pins and usually stops a spare key going in at all. We extract the fragment, check whether the cylinder survived, and replace it where the mechanism is damaged. If the door is locked and cannot be opened from outside, that starts as emergency door opening and the replacement follows.
The cylinder is seized or spins freely
A cylinder that starts to catch, needs the door lifted to turn, or spins without moving the latch is telling you it is worn inside. It is better dealt with before it seizes completely; in most cases this is a cylinder change only, not a change of the whole lock.
After a break-in, an attempt, or moving house
After any of those, the safe assumption is that the keys or the lock profile are known to someone else. We fit a cylinder with protection suited to the door, and if the lock body was damaged too we look at whether a full lock replacement is the better option.
How a cylinder replacement works
1. Call and diagnosis
Describe what happened, what kind of door it is (wood, steel, security door) and whether you still have a key. From that description you get a price estimate before anyone sets off.
2. Checking the door and the cylinder
We check the door type, the lock and the existing cylinder, and make sure the new cylinder matches it in size and type. We usually carry cylinders in several sizes and types in the vehicle, so the replacement can generally be finished in the same visit. If the lock body turns out to be damaged as well, we tell you before starting.
3. Measure, match and fit
We measure the door thickness and how far the cylinder protrudes on each side, because a cylinder that sticks out is itself a weak point. Then we fit it, tighten it, and check that the key turns smoothly from both sides and that the door still locks fully closed.
4. Handover and lock test
You get every new key, plus a short explanation of what to do if a key goes missing again. We finish with a lock test together with you, from the outside and from the inside.
Frequently asked questions
Do I need a whole new lock, or just the cylinder?
On most doors the cylinder is a separate, individually replaceable part, and in most cases that is the cheaper route. If the lock body or the multi-point mechanism is damaged we explain the difference, in security and in cost, before starting.
How long does a cylinder replacement take?
The work itself is short on most standard doors; on a security door with a multi-point mechanism it takes longer, because the mechanism has to be released and realigned. The exact duration is given on site after inspection.
Can several doors use the same key?
Yes — cylinders from the same series can be keyed alike so one key opens several doors. That is ordered in advance; we are happy to check what suits your doors.
Do you replace cylinders in Rav Bariach steel doors too?
Yes. We replace cylinders in metal doors too, including Rav Bariach steel doors and those of other manufacturers. To match the cylinder, mention the door type when you call, and whether it has a multi-point mechanism.
Which cylinders can I buy ahead of time?
The cylinder types we replace are listed under cylinder replacement, and smart locks are in the shop. A purchase can be combined with installation in the same visit.
Need a new cylinder today?
Locksmith Ruslan takes cylinder replacement call-outs for homes and businesses, 24/6, except Shabbat.