A good camera is not only the model you bought — it is the position, the angle of cover, how power reaches it, and how easily the recording gets to your phone. This page explains how to choose the points worth covering, how the common cameras differ, and what an installation visit actually includes.
When do people install security cameras?
The simple rule in planning cameras is to cover the points nobody can avoid first — the entrance, the parking space, the goods door — and only then add angles. One well-placed camera is worth more than three cameras all filming the same wall.
Front door, parking space or stairwell
The entrance is where a single camera gives the most value, because every event passes through it. We choose a height and angle that cover the door and the approach to it, not just the door itself — too low is easy to reach, too high films the tops of heads instead of faces.
A business, a storeroom or a yard
In a business the points that matter are the till, the goods door and the rear access. We plan a small number of cameras that complement each other, to keep blind spots between angles to a minimum.
Remote viewing from your phone
Most current models connect to the network and let you watch live from your phone. At the end of the installation we check that live view and recording work on the screen and on your phone.
A camera together with a smart lock or intercom
An entrance camera and a smart lock work well together: you see who is at the door and open it remotely. Supply and installation of a smart doorbell with a Wi-Fi camera can be combined in the same visit.
How a camera installation works
1. Call and initial planning
Tell us how many points you want covered, whether power is nearby, and whether the property is residential or commercial. From that we give an estimate of scope and a recommended number of cameras before setting off.
2. Marking the points on site
On the visit we check height, angle, power source and wireless signal strength at each point. We mark with you where every camera will go before anything is drilled.
3. Fitting and cabling
We mount the cameras carefully, without damaging the finish, and connect them to power and the network. Other fitting work — locks, intercoms and hardware — is collected under installation.
4. Setup and handover
We connect the system to a screen and to your phone, check live view and recording, and show you how to use it. Then we show you how to pull a recording and how to share access with a family member or an employee.
Frequently asked questions
How many cameras does a private home need?
It depends on the number of entrances and the size of the yard. A common plan starts with the main entrance and the yard, then adds points once you can see the real coverage.
Is an internet connection required?
To watch from your phone, yes: the system needs a network connection. The connection at your property is part of the planning conversation.
Is filming a shared stairwell allowed?
Filming shared or public space is subject to privacy rules and sometimes to a building-committee decision. The safe approach is to aim the camera at your own door and your own area, and to check with the neighbours in advance.
Can I order a camera and the installation together?
Yes. Cameras and video doorbells are listed in the shop and the fitting can be arranged in the same call. For lock faults on the door itself see emergency door opening and lock replacement.
Which camera types do you install?
Analogue (AHD) and IP cameras, dome cameras and pan-tilt-zoom (PTZ) cameras. The choice depends on the spot, the lighting and whether you want to watch from your phone, and that is part of the first conversation.
Do you repair existing cameras?
Yes, we repair existing security cameras too. When you call, tell us which system you have and what the fault is. See also additional services.
Want the entrance covered by a camera?
Describe the property and the points that matter to you, and we will come back with a recommendation. Available 24/6, except Shabbat.